Advantages :
•Perfect in conjunction with 100 Base-T and Gigabit Ethernet networks.
•50 micron gold plated connectors to ensure a clean and clear transmission.
•Snagless molds protect the RJ45 tap from being damaged during installation.
•Capable of improving the return loss in your current network by 40%.
•Backed by Belkin Lifetime Warranty.
•Exceeds the performance requirement of Category6. PowerSum tested.
•Internal load bar assures accurate positioning of pairs and consistent high Performance.
•2-row staggered pin configuration to control cross-talk at hyper-frequency.
BELLCOMMS Patch Cord Cable meet the following standard. :
•IEC 754-part2 2.H band on pH and conductivity Measurements.
•IEC 7034 part 2, Smoke Emissions
•IEC 332 part 1, Flammabiblity and Fire Retardant
•NES 713, Toxicity Index.
•ISO/IEC 11801, TIA/EIA 568-B
Electrical Characteristics :
Dielectric Strength:1,000V RMS at 60Hz for 1minute
Voltage rating :150 VAC maximum
Current Rating :1.5 Amp maximum
Insulation Resistance:500M-Ohm minimum
Contack Resistance:10m.Ohm minimum
Mechanical Characteristics :
Cable
Gauge :24 AWG 7/32 Stranded wire bare copper with PE insulation, CMR fire rated
Pair Count:4 pair individually colour coded with filler and PVC jacket
Sequence:Wiring sequences in 568 A & B
Durability:1000 mating cycles
RG45 Plug:Polycarbonate, FCC Part68 Subpart F, UL 94C-0
Plug Boot:PVC
Cantact Material:Phosphor bronze with 50 micro-inches gold over 100 micro-inches nickel