The BELLCOMMS product Modular Shutter range of products are the next generation of data communications solutions. the Category 6 shuttered modular jacks incorporate BELLCOMM is patented shutter mechanism. Combine this feature with high Technology with produce, and you have the most technically advanced Category6 connector on the market. these modular jacks are color-coded for both 568A and 568B standards and can be terminated using a standard Krone or 110 style tools. Clear wire retaining caps are supplied and can be used to provide additional cable strain relief.

Product Features:

•Aesthetic, contemporary design.

•BELLCOMM is fold-faced with shutter mechanism.

•Fully compliant to AS/NZS 3080:200., ISO/IEC 11801 Edition 2 2002 and ANSI/TIA/EIA-568-B, Series connection Hardware Standards.

•Backward compatible with Category 5 and 5e Products.

•Compatible with keystone face plate.

•Compatible with 110, Krone and Bix tools.

•UL 94V O rated.

•Accepts solid 22-24 AWG diameter conductors.

Customer Benefits:

•Performs beyond Category6 Standards.

•Shutter mechanism is easy to operate, simply insert the plug lead into the jack.

•Protection from dust ingress, insect infestation and the insertion of foreign objects.

•Various colors for easier circuit identification. Is backward compatible with Category5 and 5E products, allowing

• component mixing without degrading the network below the minimum component category.

•Fits all with standard keystone Wall Plates customer access to the most popular plates on the market.

 •For use in Multi-user Telecommunication Outlet Applications (MUTO)and Consolidation Points (CP).

•Flexible locking tabs allow for termination verification and assist in cable retention.

•Compatible with standard 110 Krone and Bix tools, allowing for a wider choice of tools for installers.

Electrical Characteristics:

Dielectric Strength:1,000V RMS at 60Hz for 1minute

Current Rating:1.5Amp maximum

Insulation Resistance:200M-Ohm minimum

Contrack Resistance:1m. Ohm per contact

Temperature Range: -40 C to + 70 C

Transmission Performance: exceeds ISO/IEC 11801 Class E AS/NZS 3080:2003 Class E

Mechanical Characteristics:

Modular Connector

RJ45 8-Pin Connector part 68, Subpart F and IEC-60603-7 compliant

Durability:1000 insertion cycles min.

Material: Phosphor Bronze with 50 micro-inches of gold over 100 micro-inches nickel plating

IDC Connector

IDC Material: Phosphor slicing of 22 to 24 AWG (0.64 to 0.41mm)

Insulation Diameter (Wire):0.70 - 1.40mm

Durability:10 insertions of any combination of wire gauge - two wire per slot

Connector Material: Phosphor Bronze with nickel plating IDC Body & Cover Material Fire-Retardant, UL 94V-0, Plastic

Supports Voice, 155/622 Mbps ATM, 270 Mbps digital video, 4/16 Mbps Token Ring, 100 Mbps TP-PMD, Supports 10BASE-T Ethernet, 100BASE-TX Fast Ethernet, Supports 1000BASE-T Gigabit Ethernet, and Broadband video, 100mbps TPDDI, ISDN Broadband video, ISDN